SOLGT
Jeg kan personligt garantere dig at når du først har brugt Vagabond Mini, så skifter du ikke til noget andet. Ihvertfald ikke foreløbigt. Jeg fatter ikke at konkurrenterne ikke har lanceret et lignende produkt til samme pris. Så vidt jeg har tjekket, så findes der lignende produkter nu, men priserne er langt højere end PCB.
Jeg vælger at sælge mine Vagabond Mini af den simple grund at jeg ikke får dem brugt. Prøv at google navnet og læs hvad fotograferne skriver om dem. De er meget populære og ganske eftertragtet. Paul C. Buff har deres egen europæiske distribution af disse, og det er osse igennem dem at jeg har købt alt mig Paul C. Buff(PCB) grej. Jeg er sikker på du vil finde mine priser ganske rimelige i forhold til ny-prisen og fragten oveni.
Jeg har solgt et enkelt batteri til en kammerat som er bryllupsfotograf. Han kan bruge batteriet fra morgen til brudevals uden nogensinde at løbe tør. Og så vejer batteriet kun ganske lidt, hvilket er en stor fordel for bryllupsfotograferne.
Har du tænkt dig at købe én af mine Einstein lamper, så kan jeg kun kraftigt anbefale dig at tage et af mine batterier med.
Jeg har kun gode ting at skrive om disse batterier. Og det er ikke fordi jeg nu sælger dem. De er fantastiske!
Ny prisen for en Vagabond Mini er pt. Kr. 2.610,-. Dertil skal du tilføje Dansk moms, som omregnet er ca. Kr. 520,-, + fragt.
Min pris per Vagabond Mini er Kr. 2.000,-.
Jeg har 2 stk. til salg. Det er ikke noget problem for mig at sælge dem seperat. Jeg har fået mange tilbud. Indtil videre har jeg afslået disse, da jeg helst så dem solgt sammen med en Einstein lampe.
Kontakt mig, eller klik her og send mig en email.
Billeder:
Under billederne er der en hulens masse copy/paste tekst fra PCB’s website.
Copy/paste data:
SPECS:
| Weight | 3.5 pounds total weight (total system, including battery and inverter) |
| Dimensions | 2.75” x 4.3” x 7.8” dimensions including battery, latch and power switch protrusions |
| Battery | 14.8V 8.8AH LiCoxNiyMnzO2 lithium battery (130 Watt-hours) |
| Inverter | 230VAC inverter with two 3-prong Type I 230VAC outlets |
| Battery Charging | 3-hour rapid charging with supplied universal charger (95VAC to 250VAC) |
| Powering Capacity | one to four Paul C. Buff™ flash units (the more lights connected, the longer the recycle time) |
| Recycle Time | recycles 160 Ws in approx. 0.75 seconds recycles 320 Ws in approx. 1.5 seconds recycles 640 Ws in approx. 3 seconds recycles 1280 Ws in approx. 7 seconds |
| Battery Life | typically 400 to 500 shots per charge with 640 total Ws connected typically 200 to 250 shots per charge with 1280 total Ws connected battery can be fully discharged and recharged approximately 500 times before losing 30% of its capacity (even longer life when recharged before it is completely discharge) |
| Storage | discharged battery can be safely stored for months at a time without damage; no sulfating or “memory effect |
DESCRIPTION:
Flash Units: The Vagabond Mini™ Lithium is designed to provide portable power for one to four Paul C. Buff™ flash units. Flash units from other manufacturers may or may not be successfully used with the Vagabond Mini™ Lithium. We cannot make any claim for suitability with products from other manufacturers, nor can we accept any liability for any damage that might be caused to such equipment. We will, however, warranty the Vagabond Mini™ Lithium itself as well as any Paul C. Buff™ equipment it powers.
The Vagabond Mini™ Lithium is a third generation controlled-current pure sine wave power source for operating AC powered studio flash units in the field from its built-in battery. Both small and lightweight (weighing just 3.5 pounds, including quick-change high capacity lithium battery), the 230VAC INTERNATIONAL model of the Vagabond Mini™ Lithium is designed to operate from one to four 230V Paul C. Buff™ flash units (Einstein™ units operating at 230V and the 220V AlienBees™ units).
The system includes an internal lithium battery that arrives connected to the Vagabond Mini™ Lithium inverter. This inverter takes the power from the internal battery and converts it into a usable, 230VAC true sine wave power source. Your flash units are connected to the inverter, plugging into the two Type I 230VAC power outlets (for more than two units, a power strip may be used). The Vagabond Mini™ Lithium inverter includes a multi-level, accurate battery charge indicator and a convenient front panel battery charging connection for the supplied 3-hour universal rapid charger (95VAC to 250VAC charger input). For international charging, a simple plug adapter may be used with the rapid charger for AC outlet compatibility. For heavy use, spare batteries can be charged externally so that they are ready to instantly plug in.
The inverter and battery components are completely enclosed within a strong, high-impact, flame retardant ABS housing. The fully encased battery can be instantly replaced with the slide-in latching mechanism; there are no wires or user connections other than the AC outlets and charger inlet. The unit additionally includes a light stand mounting mechanism and a convenient carrying strap.
The product utilizes the very latest LiCoxNiyMnzO2 lithium battery chemistry to provide extremely high power density and elimination of battery sulfating and poor efficacy that plagued previous battery-operated systems using heavy and inefficient sealed lead acid batteries.
The Vagabond Mini™ Lithium offers fast recycle times, providing 200 to 250 full power flashes per battery charge with 1280 total Ws (two Einstein™ units, for example) connected and 400 to 500 full power flashes per change with 640 total Ws (one Einstein™ unit or two AlienBees™ B800 units, for example) connected.
Like essentially all battery/inverter type supplies, modeling lamps are not generally used because their power draw would quickly deplete the battery and slow recycle times dramatically. The modeling lamps should only be used for brief previews to maximize battery life.
Note: The Vagabond Mini™ Lithium is offered in both 120VAC and 230VAC models. The 120VAC model is designed for use with all standard Paul C. Buff™ flash units (AlienBees™, White Lightning™, Zeus™ and Einstein™ units). The 230VAC model is designed for use with Einstein™ E640 units operating at 220 Volts / 230 Volts and for 220 Volt versions of our AlienBees™ flash units. The 230VAC model has two 230V Type I sockets and MAY NOT be used with standard 120VAC Paul C. Buff™ flash units. The outlets are not compatible and plugging a 120VAC unit into a 230V Vagabond Mini™ Lithium can cause damage to both units.
FEATURES:
- the VMB8.8A plug-in battery pack (14.8V lithium battery)
- the CU120-230V Vagabond Mini™ 230VAC inverter
- the VMC3A 3-hour rapid battery charger
(two pieces – charger and cable) - the VMSTRAP Vagabond Mini™ shoulder strap
- the 1060304 Vagabond Mini™ removable light stand mounting clamp
(three pieces – clamp and tightening screw with spring) - your Vagabond Mini™ Lithium Owner’s Manual
Note: The 230V Vagabond Mini™ Lithium ARRIVES WITH ONE AU TYPE POWER CABLE. The unit has two Type I 230V sockets accepting standard Type I 230V power cords. We offer these cords in both 15-foot and 3-foot lengths here or they can be purchased locall
Flash Units: The Vagabond Mini™ Lithium is designed to provide portable power for one to four Paul C. Buff™ flash units. Flash units from other manufacturers may or may not be successfully used with the Vagabond Mini™ Lithium. We cannot make any claim for suitability with products from other manufacturers, nor can we accept any liability for any damage that might be caused to such equipment. We will, however, warranty the Vagabond Mini™ Lithium itself as well as any Paul C. Buff™ equipment it powers.
Power Cords: The Vagabond Mini™ Lithium has two standard North American 120VAC, three-pronged power outlets on the front panel of the inverter. The power cords that arrive with Paul C. Buff™ flash units (the standard UPC15 or DA-UPC15) may be used as well as the optional shorter cord (VM-UPC3-120V) and optional longer cord (UPC25). To connect more than two flash units, a standard power strip / surge protector may be used. Choose a well-made power strip with grounded outlets. The proper power cord must be used with the system; simple cord adapters may NOT be used.
Note: We recommend purchasing the VM-UPC3-120V Optional 3-foot Power Cord when using the Vagabond Mini™ Lithium as this allows minimal cord tangle in your setup. See the last photo above for an example.
Batteries: The Vagabond Mini™ Lithium arrives with a 14.8V, 8.8AH LiCoxNiyMnzO2 lithium battery. For heavy use, a spare battery can be purchased and kept charged for instant, plug-in use.
Battery Charging: The battery is charged with the supplied 3-hour rapid battery charger, plugged into a standard AC wall outlet. For use internationally, a simple outlet adapter may be used on the VM3CA battery charging cable (100-260VAC charging).
Light Stands: The Vagabond Mini™ Lithium arrives with a light stand clamp that fits around the stand shaft on all Paul C. Buff™ light stands and most other standard light stands. Care must be taken when attaching the system to a stand, with special consideration taken for the additional weight and distribution of weight so that addition of the Vagabond Mini™ Lithium does not make a stand overly top-heavy and unstable.
Flash Units from Other Manufacturers: The Vagabond Mini™ Lithium is designed specifically for powering Paul C. Buff™ products and we cannot make any claim for suitability with products from other manufacturers, nor can we accept any liability for any damage that might be caused to such equipment. We will, however, warranty the Vagabond Mini™ Lithium itself as well as any Paul C. Buff™ equipment it powers.
Auxiliary Equipment: The Vagabond Mini™ Lithium may be used to power non-flash continuous loads for small electrical appliances such as fans, computers or radios. The maximum continuous power drawn in such applications is 120 Watts. If a continuous load is used in conjunction with flash unit use, this number should be reduced. It should be noted that when the Vagabond Mini™ Lithium is used to recycle flash units, the output voltage will not remain at 120 VAC; it will drop lower during the recycle period of the lights. Therefore, equipment that requires continuous 120 VAC should not be used in conjunction with flash units. To the best of our knowledge, the momentary low voltage will not affect laptops connected via their battery chargers. However, AC-powered computers will likely crash under the “brown out” conditions and likely draw more than 120 Watts. If you plan to power auxiliary equipment, you should consult the product’s manual and / or check with the product manufacturer to determine the power consumption.
Note: The Vagabond Mini™ Lithium is offered in both 120VAC and 230VAC models. The 120VAC model is designed for use with all standard Paul C. Buff™ flash units (AlienBees™, White Lightning™, Zeus™ and Einstein™ units). The 230VAC model is designed for use with Einstein™ E640 units operating at 220 Volts / 230 Volts and for 220 Volt versions of our AlienBees™ flash units. The 230VAC model has two 230V Type I sockets and MAY NOT be used with standard 120VAC Paul C. Buff™ flash units. The outlets are not compatible and plugging a 120VAC unit into a 230V Vagabond Mini™ Lithium can cause damage to both units.